Constructioneer

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com

Demolition Robots vs. Excavators

by: Jeff Keeling
Brokk demolition robots have a three-arm system that on some models can rotate 360 degrees to perform a range of tasks at nearly any angle.
Brokk demolition robots have a three-arm system that on some models can rotate 360 degrees to perform a range of tasks at nearly any angle.
A contractor attaches the Brokk 330D demolition robot to a custom platform and lifts it with a crane, using the breaker attached to the machine’s three-part arm to chip away at the concrete silo.
A contractor attaches the Brokk 330D demolition robot to a custom platform and lifts it with a crane, using the breaker attached to the machine’s three-part arm to chip away at the concrete silo.
Contractors can operate the Brokk demolition robot’s three-part arm with attachments for breaking, cutting, and a number of other applications from a safe distance.
Contractors can operate the Brokk demolition robot’s three-part arm with attachments for breaking, cutting, and a number of other applications from a safe distance.
With cutting-edge technology enhancing efficiency and safety on a number of jobsite applications, hydraulic breakers might seem a bit dull in comparison.

Mounted on a carrier without the correct hydraulic oil flow and pressure, system back pressure and some consistent downward force, they just sit there, making noise and creating dust. Regardless of the carrier – excavator, backhoe, or skid steer – they will not perform to their stated specifications without those four critical parameters in place. And there, in a nutshell, is one of the key differences between an excavator and a demolition robot.

From the Attachment Backwards
In a sense, a demolition robot is designed from the attachment backwards. The oil flow and pressure – right where the hoses attach to the hammer – are calibrated to be exactly in line with the breaker manufacturer’s requirements. The system backpressure is kept as low as possible, and the downward force that the arm can exert on the hammer, whether it’s on a slab, a wall or a ceiling, is consistent with the demands of the breaker. In effect, the hammer and the carrier are perfectly matched so the hammer can operate at peak power and efficiency.

On the other hand, excavators are – as their name suggests – primarily designed to excavate. In fact, they do that quite well. Better, frankly, than demolition robots can. But when it comes to demolition, just hanging a hydraulic breaker off the end of the boom is not enough to achieve the kind of concrete-breaking results that a robot can generate. An excavator’s hydraulic system simply doesn’t provide what the hammer needs to perform at its optimum level.

Power in a Small Package
It should not be surprising, then, that the single biggest difference between excavators and demolition robots is the power-to-weight ratio. Simply put, a 5-ton demolition robot easily handles a 1,600-pound breaker designed to fit onto a 10-17-ton excavator. And spoiler alert: the demolition robot would still outperform the much larger excavator in breaking concrete walls and ceilings.

All that power in such a compact package opens up all kinds of possibilities to do work in limited access, confined spaces, or where floor loads are an issue. Top-down demolition of high-rise structures is fast becoming the realm of the demolition robot. Where before larger excavators were used, and extensive shoring was needed, today, light-on-their-feet but powerful robots can be deployed, with results that are quicker and safer than traditional methods.

Geometric Gymnastics
A demolition robot is much more than an excavator without a cab. Look carefully at the arm system. There are three parts to it, compared to just two on a traditional excavator. Those three arms can be manipulated to achieve all kinds of geometric gymnastics, not only holding the hammer against the work at any angle, but providing significant downward force, even directly overhead. Available models range from a tiny 1,100 pounds to over 12 tons, many offering zero-emission electric motors operating on 480-volt, three-phase power. There are no-strings-attached diesel-powered versions for outside jobs, or for industrial applications where inside air quality can be properly managed.

The four outrigger legs on demolition robots provide a super-stable platform from which to operate. The entire machine is designed to withstand the rigors of the demolition process – the vibrations and reactive forces – as well as the heat generated by the large hydraulic system packed into the compact cabinet.

Gomaco
Your local Gomaco dealer
Gomaco -Contact Local

The high-capacity hydraulics found on demo robots lend themselves to a wide range of attachments beyond hydraulic breakers, making them even more versatile: crushers, rock drills, grapples, scabblers, core drills, and more can be mounted and applied across a number of challenging applications in tunnels, mines, metal processing plants, and in nuclear facilities.

Demolition robots happily go where the operator sitting inside the cab of an excavator would rather not. And once they get there, their raw power and compact size make them an increasingly valuable addition to the construction equipment landscape.

Gomaco
Your local Gomaco dealer
Gomaco -Contact Local
Gomaco
Your local Gomaco dealer
Gomaco -Contact Local
Gomaco
Your local Gomaco dealer
Gomaco -Contact Local